RFD-4MQ2010, 4 ELEMENTS 5 BANDS HF QUAD 20-10M BAND.
Meet the RFD-4MQ2010, Ultra High Gain and Ultra Low Noise 4-Element, 5-Band HF Quad
Engineered for serious DXers and competitive contesters, the RFD-4MQ2010 delivers outstanding performance across the five major HF amateur radio bands from 20m through 10m. Designed for demanding operating environments, it combines a robust mechanical structure with an innovative multiband feeding system.
Advanced Engineering. One Reliable Feed.
While many conventional multiband quad antennas depend on band-switching arrangements, separate feed systems, or quarter-wave stub matching, the RFD-4MQ2010 uses our Parallel Transmission Line Single-Feed System.
This architecture provides a common single-coax feed across all five bands, supporting consistent, dependable multiband operation without switching between separate feed systems.
Heavy-Duty Construction for Long-Term Performance
Radiating Elements
- 2.5 mm² pure copper wire with 0.8 mm PETG insulation for enhanced outdoor protection.
- Approximately 9 kg of copper wire used across all five bands.
Telescopic Fibreglass Spreaders
- Telescopic construction ranging from 32 mm to 22 mm outside diameter.
- 2 mm wall thickness for a strong, practical structural design.
Heavy-Duty Aluminium Boom
- Three aluminium square-tube sizes: 60 × 60 × 3 mm, 50 × 50 × 3 mm, and 40 × 40 × 2 mm.
- Approximately 30 kg of aluminium boom structure alone, built to meet demanding mechanical requirements.
Professional-Grade Hardware
- SS-304 stainless-steel boom truss support wire.
- SS-304 stainless-steel fasteners and fittings throughout.
Built for Serious DXing and Contesting
The RFD-4MQ2010 is designed for operators who want to capitalize on every opening, overcome challenging propagation conditions, and compete confidently in crowded pile-ups.
Whether you are pursuing rare DX stations, taking part in major contests, or maximizing the potential of low-power operation, this antenna is engineered to provide a capable and dependable station presence.
When propagation is challenging and every contact matters, your antenna system can make the difference.
Electrical Specifications
|
Bands/Frequency |
20m |
17M |
15M |
12M |
10M |
|
Gain( Free Space) |
8.5 dBi |
9.51 dBi |
9.7 dBi |
9.5 dBi |
10.25 dBi |
|
Gain at 20m AGL |
13.5 dBi |
14.6 dBi |
15 dBi |
14.52 dBi |
15.3 dBi |
|
Front Back Ratio |
22 dB |
23 dB |
38 dB |
35 dB |
25 dB |
|
VSWR |
Less than 1.9 on all Bands |
||||
|
Feed Point |
Single Feed for all 5 Bands( All Driven Elements are Connected through 12mm OD aluminium Tube parallel transmission lines with specific characteristic impedance) |
||||
|
Impedance( Final Output) |
50 ohm |
||||
|
Power rating/ Matching |
2 K.W through 2:1 Current Bal-Un |
||||
|
Radiation Pattern |
Directional |
||||
Mechanical Specifications
|
Mounting Mast Diameter |
2 Inch |
|
Boom Length |
8.4 m |
|
Wire Elements |
2.5 sq. mm with 0.8 mm PETG Insulation |
|
Connector |
SO-239 |
|
Turning Radius |
4.2 m |
|
Wind speed Survival |
150 Km/h |
|
Antenna Weight |
60 kg |
|
Material used |
Aluminium 6063,6061,FRP Tubes, SS-304 & 2.5 sq. mm PETG enclosed pure copper wire |